To avoid injury, do not touch the blade when handling the IBT Cleaner. WARNING: The blade on the IBT Cleaner is very sharp. Turn the release lever on the left side of the cover to the right to lock the cartridges into position.When finished, close the Drum Cartridge Cover.Repeat steps 1 and 2 for the remaining cartridges.Push the cartridge into the machine until it stops.Grasp the orange handle of the first Drum Cartridge and gently pull it out of the printer.If the problem persists, continue with the next step. Repeat steps 1 and 2 for each printhead.Slowly push the printhead lens cleaner back into the printhead until it stops.Slowly pull the printhead lens cleaner out until the three dots are visible.Note that the printhead lens cleaner do not detach from the printer. Each printhead has its own cleaning tool. Turn the orange lever to the left and pull the Drum Cartridge Cover down until it clicks into position.Before you begin, make sure the printer is not copying or printing.Scrap paper to protect the floor when reseating the Waste Toner Container.Step 7: Replace the Fuser Assembly Materials required: Step 6: Replace the Appropriate Drum Cartridge Step 3: Check the Intermediate Belt Transfer (IBT) Cleaner Streaks, lines or spots on copies and prints can be caused by contamination, dirt or debris within the paper path, such as on the printhead lenses or transfer belt. Such defects can also be caused by using old or damp paper supplies or paper not within the machines proper specifications. DocuShare Enterprise Content Management.

Xerox workcentre 7855 fuser